How to Fix PC Automatic Repair Loop in Windows 10?

Are you attempting to start your computer and finding it endlessly stuck in an automatic repair loop? You probably feel frustrated and helpless, thinking your precious device might never boot up again. Don’t give up just yet! We will dive deeply into why this happens and teach you how to fix the PC automatic repair loop on Windows 10.

With our step-by-step guide, you too can have your computer back up and running quickly and easily, solving all those pesky technical issues that consume time out of your day.

What is A PC Automatic Repair?

An Automatic Repair is when your computer attempts to repair its operating system (Windows) but fails due to one or more errors. It results in a feedback loop, where Windows tries to repair itself over and over again but never succeeds. It usually happens after a major software update or when significant changes are made to the computer’s configuration settings.

A blue or black screen of death mistake will appear. According to internet research, consumers of Dell, Asus, Lenovo, HP, and Acer are the most frequent sufferers of this problem.

In certain scenarios, an automatic repair can be useful in restoring a broken startup process. Still, there can also be times when it fails to help, so you may need further assistance from an IT specialist. The PC Automatic Repair may not always be able to solve your computer issues, but it can often save you time in diagnosis and repairs.

Causes of Automatic Repair Loop in Windows 10

Causes of Automatic Repair Loop in Windows 10

There are several different causes for the Windows 10 Automatic Repair loop. Some of the most common include: 

  • Corrupted System Files – If any important system files on your computer are corrupted or damaged, this can cause an automatic repair loop. This can happen due to viruses or malware or if you manually edit system files without taking proper precautions.  
  • Hardware Issues – Faulty hardware components, such as RAM, hard drive, motherboard, etc., can also cause the automatic repair loop to occur as they prevent your computer from booting properly.  
  • Incompatible Software – Programs and drivers not compatible with your version of Windows can also lead to automatic repair loops as they interfere with normal system processes.  
  • Power Outage – Sudden power outages can disrupt normal system operations and lead to an automatic repair loop if not addressed quickly enough by restarting your computer in Safe Mode.  
  • Issues With Updates – Installing faulty or incompatible updates may also cause your computer to enter an infinite automatic repair loop due to conflicts between software versions or other issues with the update itself. 
  • Windows Boot Manager File Corruption – The Windows Boot Manager file can become corrupted due to virus attacks, software changes, or other causes, leading to an automatic repair loop.

Signs You Ran into Windows Automatic Repair Loop

Have you ever started up your computer to be faced with a never-ending cycle of automatic repairs?

If so, you’ve likely run into the infamous Windows Automatic Repair Loop. This loop can be a major pain to deal with, and it can cause your computer to perform far slower than normal.

Here are some common signs that you’re stuck in the Windows Automatic Repair Loop and what you can do about it.

?Unable to Boot Up Regularly 

One of the most common signs that you’re stuck in an automatic repair loop is that your computer won’t boot up. Instead, as soon as you turn on your machine, it will start attempting to repair itself repeatedly without ever finishing or booting up properly.

It could indicate a serious issue with your system, such as a corrupted system file or driver crash, among other possibilities.

?Black Screen with An Error Message

 Another sign of the Windows Automatic Repair Loop is a black screen with an error message. This message will usually state something along the lines of “preparing automatic repair” or “diagnosing your PC” and will provide you with more details about what might be causing the issue.

?Repeated Error Messages 

Another sign that your PC is in the Windows Automatic Repair Loop is if your screen displays repeated error messages when attempting to start up. These errors range from “Unexpected Error Occurred” or “Windows Could Not Start Properly” messages.

These errors will usually appear before the loop begins, and restarting your computer will not eliminate them. It could make them worse by forcing your machine into the infinite loop of repeatedly repairing itself without success. 

?Missing System Files 

The last sign that you may be stuck in an automatic repair loop is if certain system files are missing from your startup process. For instance, if you no longer see programs like Safe Mode during startup, this could indicate that something has gone wrong within Windows itself, and it’s unable to find these necessary files during its attempts at repairing itself automatically.  

How to Fix PC Automatic Repair Loop?

How to Fix PC Automatic Repair Loop

Here are some tips on how to fix the Automatic Repair Loop in Windows 10. 

System Reset Option 

The first option you should try is a System Reset, which will restore your computer to its factory settings without deleting any files. To do this, go to Settings > Update & Security > Recovery > Reset this PC. Select “Keep my Files” and follow the instructions to complete the reset process. It should fix the problem if software issues are causing it.

Use Windows Restore

A System Restore point creates a backup copy of the operating system files, the drivers, settings, the Windows registry, and other vital data. It doesn’t impact other files.

If you’ve already saved a System Restore point, you may terminate the never-ending repair cycle by rolling back your system settings to when the issue first appeared. Utilizing system restore

  1. Activate the Windows Recovery Environment (winRE). If your pc doesn’t power cycle on its own, follow the directions in the section above.
  2. Open Troubleshoot from the Choose an option page.
  3. Select the Advanced Options tab after that.
  4. In the upper left corner, choose System Restore. Then, adhere to the on-screen directions.
  5. Select the most recent system restore point or your preferred option. To finish the procedure, click Next and adhere to the directions shown on the screen.

Use Check Disk Utility

Connect your PC’s Windows installation disc or System Repair Disc/Recovery Drive, choose your preferred language, and click Next to proceed.

  1. Choose the Repair Your Computer option.
  2. Select Troubleshoot and then go to Advanced Options.
  3. From here, choose Command Prompt.
  4. Type in chkdsk/f/r C: into the command prompt window and press Enter. It should scan your drive and fix any errors causing the Automatic Repair Loop to continue.

Run Windows Memory Diagnostic Tool

The Windows Memory Diagnostic Tool checks for errors in the RAM. To access this tool, reboot your computer and press F8 or F12 as soon as it starts up. Then select “Windows Memory Diagnostic” from the boot menu and follow the steps to run the tool.

Boot Your PC in Safe Mode

If none of the above steps work, you can try booting your PC in Safe Mode. To do this, press F8 when it starts up and selects “Safe Mode” from the options given. You may also need to keep holding down the Fn key on certain devices.

This mode will allow you to access your computer to make necessary changes or run virus scans to identify potential issues.

You may start your computer in Safe Mode with Networking by hitting F5 on your keyboard. Watch for your computer to restart, then check to see whether it boots properly.

You may keep on troubleshooting if Windows 10 begins in Safe Mode without displaying the “Preparing automated repair” signal. For example, using Windows Defender to check your computer for malware is an excellent beginning step.

Check Your Hard Drive for Errors  

If none of these options work, an issue with your hard drive or partition might prevent it from booting properly. You can check your hard drive for errors by running Error Checking in Windows Disk Management (Start > type “Disk Management”).

  1. Right-click on your primary hard drive and select “Properties,” then click “Tools > Check Now” to begin scanning for errors.
  2. If any are found, select either “Automatically fix file system errors” or “Scan for and attempt recovery of bad sectors” to repair them automatically.
  3. Afterward, restart your computer and see if this helps solve the issue.  

Recover Data from Computer Stuck at Automatic Repair

Are you trying to recover data from a computer stuck in automatic repair mode? Various factors, including viruses and hardware malfunctions, can cause this issue. Fortunately, there are several steps you can take to get your data back safely and securely.

?Enable Safe Mode 

The first step is to boot your computer into safe mode. It will help prevent further damage or corruption of your files while you attempt recovery. To do this, press F8 once your computer starts up and select ‘Safe Mode’ from the available options when prompted.

?Create a Backup of Your Files 

Once successfully booted into safe mode, you must create a backup of all your files before attempting any recovery procedures.

You can do this by using an external hard drive or USB drive to copy over all the data stored on your computer. This way, you will have a copy of all your important documents and files if something goes wrong during the recovery process. 

?Try a System Restore Point 

The first method of recovering data from a computer stuck at Automatic Repair is by trying a system restore point. A System Restore Point is when the operating system saves certain settings and information on your computer in case something goes wrong. To execute a system restore point, follow these steps: 

1. Boot your PC into Advanced Startup Options (Press F8 or Shift + F8 while booting). 

2. From the Advanced Startup Options menu, select “System Restore.” 

3. Select the most recent system restore point created before you got stuck in Automatic Repair mode. 

4. Follow the instructions on the screen and wait for it to finish restoring your system settings to the restore point you selected earlier. 

5. Once complete, restart your PC and check if you recover any of your files in their original locations or move them to another folder called “Previous Versions,” which is usually located at C:\Windows\Previous Versions\.  

?Use Command Prompt 

Another way to recover data from a computer stuck at Automatic Repair is by using Command Prompt. This method requires you to use some basic commands to access and copy over your important files from the hard drive before reinstalling Windows or reformatting it entirely. To use this method, follow these steps: 

  1. Boot your PC into Advanced Startup Options (Press F8 or Shift + F8 while booting).  
  2. Select “Command Prompt” from the Advanced Startup Options menu and enter.  
  3. Type the “diskpart” command and press Enter key when prompted with a new line in the CMD window.  
  4. Type the “list disk” command followed by pressing Enter key again. It will show you all available disks connected to your PC.
  5. Select your main HDD/SSD where Windows was installed with the “select disk 0” command (or whatever number is next to it), followed by pressing Enter key again.
  6. Type the “list volume” command followed by pressing Enter key one more time. Now you should see all available partitions connected with that particular HDD/SSD drive on which Windows was installed.
  7. Execute the “assign letter=X” command where X stands for any unused letter like Z, followed by pressing Enter key. It will assign an unused letter for easy navigation between drives when using Command Prompt interface.
  8. Navigate through different drives with the cd \command until you reach C:\ directory, where all user data resides.
  9. Copy all contents from C:\ directory onto an external storage device like a USB flash drive so you can use them after reinstalling Windows or formatting HDD/SDD entirely.
  10. Unmount the previously assigned partition with the “remove letter X” command followed by pressing Enter one last time, where X stands for the previously assigned partition letter, as shown in step 7 above.
  11. Exit out of the Command Prompt window with the exit command followed by pressing Enter key once more before rebooting the PC into normal mode as usual.

Frequently Asked Questions

How can I prevent the automatic repair loop from happening again?

Check the disk for errors and try running the Check Disk command or Chkdsk. It can help detect problems that are causing the automatic repair to loop. Also, use System Restore to roll back Windows updates or changes that might be causing the issue. You can also try refreshing or resetting your PC if necessary.

Consider doing a clean installation of Windows to ensure no residual windows system files are living on your hard drive that could be causing an issue. Taking precautionary steps such as these should help avoid falling into the dreaded automatic repair loop in the future!

How do I reinstall Windows?

You should start by checking if your computer meets the minimum requirements that Windows needs to run on. Once these are met, you will want to begin the installation of Windows. Either use a CD/DVD or an ISO image file downloaded from the internet and let the installation wizard guide you through the process.

Following this, you may need to complete additional setup requirements before your new version of Windows is ready for use, such as accepting license agreements and creating user accounts. After that, your computer should be ready for use with a new version of Windows installed!

How do I manually trigger an automatic repair in Windows 10?

Triggering an automatic repair in Windows 10 is a useful troubleshooting technique that can sometimes allow you to pinpoint a specific issue causing confusion and slowdowns.

The process is straightforward: Launch the Settings panel, select Update & Security, choose Recovery, and press the Restart Now button under Advanced Startup. It will cause your computer to reboot into the advanced options page.

From there, select Troubleshoot > Advanced Options > Automatic Repair, following which Windows 10 will automatically check for corrupt system files or other factors potentially affecting the system’s performance. While it won’t provide a sure-fire answer if something is wrong with your system, it’s worth a shot before reinstalling Windows entirely.

How do I skip Windows repair?

Skipping Windows repair is a great way to save time if you know your computer isn’t experiencing any major issues. For instance, if your computer isn’t turning on or suffering from significant software malfunctions, performing Windows repair may be necessary. If that’s not the case, you can safely skip the repair process and back up and running almost immediately.

All it takes is to access the Recovery Options menu located within Windows Advanced startup options or your original Windows disc. This menu should have several choices for repairing the system or starting fresh with a clean copy of your current version of Windows. But skipping Windows repair is often the best course of action for basic troubleshooting like soft reboots and crashes.

Final Words

Fixing the dreaded PC automatic repair loop can be tricky, but you can do it with the right approach and patience. Make sure to back up your important data before attempting any of these steps to protect yourself from data loss. You may need to reinstall Windows entirely to fix the issue if all else fails.

Hopefully, these steps will help you get your PC up and running again in no time! If you’re ever in doubt or need assistance, it’s always a good idea to consult a professional technician with experience dealing with this type of issue.